When should you replace your water heater

posted in: replace water heater | 0

Such as the case with any home appliance, water heating units stop working with time and require to be changed. Nobody likes having a cold bath, so ultimately, you’d want to be in a position to change your water heater before it entirely stops functioning.

Should you wait a long time, it can result in a considerably bigger problem. For example, massive leaks or water damage to your house. So how do you realize when it’s time for you to change your water heater? This article is going to provide you with a number of signs to assist you.


Sign # 1
The age of the water heater

The older the water heating system, the more likely it is to stop working. Generally speaking, a water heater lasts, approximately, 8 to 12 years. If the water heater is pressing the 10-year point, there’s a great chance it’s time for you to change the unit. With appropriate routine maintenance and a little fortune, you might be able to practically double the life-span of your water heater. Nevertheless, occasionally, even with the perfect of proper care, a water heater might want to be changed after only a few years.


Sign # 2
How rusted is the water heating unit

Verify your tank for corrosion or rust. The majority of hot water tanks are manufactured from metal and will ultimately rust. You may also observe rust in the hot water the moment it’s drawn from the tap.
If you notice corrosion or rust by the temperature and stress relief valve, and/or the water inlet and electric outlet connections, it’s a powerful sign that your tank is rusting and must be changed.

Exactly where your water heater is situated within your house may decide the next step. Leaking water may cause a lot of money of harm to your house. The ideal choice would be to change your water immediately to stop needless expenditures and damage. Nevertheless, if your tank is situated in a garage, you might wait until it starts to leak. The water damage may possibly be minimal, and on a strong cement flooring, it can be simple to clean.

An additional choice is by using a water sensing unit alarm to notify you of a leak. These types of affordable alarms have sensors which will trigger once they become wet. You can “buy some time” using this solution and have the opportunity to arrange your water heater replacement unit.


Sign # 3
Drain water is unable to function from the drain valve

With time, the sediment develops and settles inside the bottom part of the water heater’s tank. For those who have a gas water heater, you might have observed a popping noise when the burner ignites. That is a sign that there’s sediment accumulation.
Purging your water heater annually will get rid of the sediment and aid the prevention of harm to the tank, as well as prolong the lifespan of your water heater. But if you’re not on a regular basis purging your tank, the sediment is going to build-up and ultimately result in some significant complications.
It ought to be mentioned that in extreme cases, leaks can build when the sediment is activated during the depleting process. We suggest contacting an expert plumber to help you.
There’s frequently the possibility that the sediment accumulation could have reached a degree in which the tank may no longer be depleted. Once this is the case, it’ll be essential to change your water heater.


Sign # 4
Your water heating tank is leaking

Leakage from the hot water tank is commonly attributable to an internal issue and is seldom repairable. Follow these steps to check if you can figure out where the leakage is originating.

If you discover the leak is originating from the tank itself, you’ll more than likely change your water heater.  To stop further water harm, switch off both the water and electrical power to the water heater. Then contact an experienced plumbing company to set up a new unit.


Sign # 5
Water is cold

Something is evidently bad if you discover your water isn’t as heated as it should be, or even worse, it isn’t hot at all. There could be an issue with the heating component, or the electrical thermostat. It’s not unusual for these components to fail completely or simply break down with time. You can try changing the heating system component.


Sign # 6

Damaged dip pipe

Another kind of cause is a damaged dip pipe. The dip pipe is a plastic material pipe that operates from the cold water inlet to the bottom part of the tank. If it’s damaged, the outgoing hot water is going to be mixed by the inbound cold water. The outcome is much cooler than the preferred hot water.  Replacing a dip pipe is also quite easy and affordable.







Leave a Reply

Your email address will not be published. Required fields are marked *